By reverse osmosis.
Sea water under high pressure is pumped through the membranes which act as molecular sieves, only allowing fresh water to pass through.
According to my needs: coastal or deep-sea navigation? What is my power source?
For coastal navigation, a battery powered watermaker (12 or 24V) can be used. For deep-sea navigation, a power generator will be justified by other needs as well as the desalinator. I will then have the choice between a 220V watermaker or a DUO bi powered desalinator
In this case, a 12 or 24V water maker producing 60 or 100 L/H is suitable.
In this case the most logical is to choose a DUO 60 or DUO 100 (a SOLO 60 or SOLO 100 is also possible).
For up to five people, the D60 (60L/Hr.) is well adapted. For more than five persons, a 220V system with greater output is more appropriate.
With more than 8,000 watermakers working around the world, we are in a position to advise you about installation. If there is sufficient space in the boat, a compact version is suitable. The remote control version is suitable for boats for which size and weight of equipment are important factors facilitating installation and maintenance of the equipment.
In this version, the control panel is integrated into the frame of the HP motor.
In this version, the control panel is separated from the HP motor unit.
If the watermaker is not used and you cannot rinse it once a month with fresh water, please sterilize your membranes. BEWARE: Not more than twice a year.
If you sail during several months and you only drink the produced water, you should preferably install this cartridge.
A solenoid rinsing valve is mounted on the pre filter(s) which is activated for two minutes when reducing pressure.
If you use the watermaker every two or three days, it is not necessary to rinse it: Please just switch off before reducing pressure and the rinsing operation will not be done.
A solenoid rinsing valve is mounted on the pre filter(s) which is activated for two minutes when reducing pressure.
If you use the watermaker every two or three days, it is not necessary to rinse it: Please just switch off before reducing pressure and the rinsing operation will not be done.
Dessalator®, ZI des 3 Moulins, 282 rue des Cistes, Bâtiment Euro 92, 06600 Antibes - Tél. +33 (0)4 93 95 04 55